What to Look for and What to Do In A Roof Inspection
Admin Admin April 28, 2022

Every homeowner's to-do list should include a regular roof check as a mandatorily. Follow these tips to inspect your roof safely and securely.

Homeowners who neglect their roofs put themselves and their families at risk. To protect your property against water infiltration, it is essential to have a well-maintained roof. Roof inspections may be done on your own time if you follow these five tips from a metal roof specialist near me.

metal roof specialist near me

Tips for Metal Roof Inspections

1. Find algae, moss, or a pile of leaves 

With binoculars, start your roof inspection from the ground. Check your roof for mounds of leaves, vegetation, or debris that might cause major damage to the roof. They may trap rainwater that seeps into the sheathing under the shingles and even into the roof structure itself.

Moss is harmful because it absorbs moisture. Moisture may create mold and deterioration in the timber framework under your roof, compromising its structural integrity.

How to get rid of moss? If the moss is fresh, use moss killer and sweep it away with a broom or brush. To prevent moss and algae off your roof for the rest of its life, use moss- and algae-resistant shingles when you have it re-shingled, or ask a metal roof specialist near me.

>>Related post: Tips for Selecting the Right Roofing for Your Home

2. Look for Shingles that have been dented

A buildup of hot air in the attic might cause your asphalt shingles to bend, collapse or curl. To keep your roof in satisfactory condition, you should replace those shingles that allow water to get in and prevent proper ventilation or ask for more info about metal roof specialists near me. To avoid further damage, you should have your complete roofing system replaced if you find that more than one-third of your shingles are dented.

3. Look for shingles that are damaged, missing, or old

Missing or broken shingles may also allow water in. If you have hardwood shingles or wood shake shingles, look for symptoms of dry rot from the ground or a ladder. Look for cracked, chipped, broken, or missing shingles on asbestos, slate, or clay tile roofs. When inspecting a metal roof, look for corrosion, rust, stress, wrinkling, and other wear indicators and ask a metal roof specialist near me.

As you clean your gutters, look for indications of deterioration on asphalt shingles. Asphalt has granules, and these granules will break loose and enter your gutters as the shingles age. If you find asphalt particles, look closely for broken or missing shingles in your gutters.

>>Related post: Metal Roof Restoration Or Metal Roof Replacement?

4. Take a closer look at the roof

If you can, climb a ladder and examine your roof from the ground up. Check the flashings surrounding the chimney, dormers, and vent pipes for damage while you're up there. (Your roof's flashings are the metal components that divert water.) Your roof and the walls of your house might rot if your flashings are damaged or rusted, allowing water to seep into your roof's internal structure. You may likely have to repair the flashings if you see any damage, then call a metal roof specialist near me.


facebook linkedin twitter mail
previous post
next post
Relative Posts